MFactory BMW 188L Plate LSD

In Stock
ex vat
Regular price £1,658.33


  • Type Plate Limited Slip Differentials
  • Brand MFactory
  • SKU MF-TRS-10E46-2

*Please make sure that this item is suitable for your model before purchase & leave the last 7 digits of the VIN in the 'Order Special Instructions' box in your cart*

Medium case 188mm (29.5mm offset) 10 bolt crown wheel differential - most commonly used in 4 cylinder models

Suitable For:

  • E81 118d manual
  • E82 120d manual
  • E87 116d manual; 120d auto up to 01/2007; 120d manual
  • E46 320d auto; 320d manual (2.79:1 ratio); 323i manual; 328i; 330i manual; 330xd
  • E90 318d; 320d manual (7566218 & 7566274 diff); 325d; 330d; 325i manual (7566172 diff); 330dx auto
  • E92 320d; 325d; 330d; 325i manual (7519942 diff); 330dx auto
  • E39 520d manual; 525d auto; 525i manual; 528i manual; 530i manual; 535i; Alpina B10 3.2 manual (2.93:1 ratio) / Alpina B10 3.3 manual
  • E60 520d manual; 525d auto after 03/2007; 530i manual
  • E83 X3 3.0d manual rear axle
  • F25 X3 SDrive 2.0d rear axle
  • E53 X5 3.0d manual rear axle
  • E85 Z4 2.2i manual; 3.0i manual; 3.0i SMG

MFactory Metal Plate Limited Slip Differential. Gain a prominent advantage over the competition with this LSD. Through the smooth and consistent distribution of power to the wheels the LSD puts power to the ground and maximises your vehicle's traction where conventional Torsen LSD's fail. Available in 1.0 way (acceleration only), 1.5 way (acceleration/deceleration) and 2.0 way (acceleration/deceleration). All MFactory metal plate LSD's are set at 60% lock for street/track usage

Made from imported Japanese steel these diffs are 'forged' and 'cryo-tempered' for unsurpassed toughness. They are designed to withstand the extreme shock loads of competition-level drag racing. Advanced gear geometry designed using industry-leading software puts more power to the ground and the highest quality Brighton-Best hardware is used. Coil spring preload system ensures minimal power loss and maximum response. Lower initial pressure ensures maximum durability and chatter-free operation. Fully re-buildable with adjustable lock (60-100%) and option of different cam type

When installing your MFactory Metal Plate LSD, only use Torco Manual Transmission Fluid (MTF). This is the only oil MFactory recommends. It is also recommended to install new diff bearings

*BREAKING IN PROCEDURE - Figure-of-8 for around 15-30mins.
*WARM UP - The transmission should be warmed up for 15 minutes before going on track

Includes assembled differential unit only. Bearings, gears, gaskets/seals etc are not included


Designed for Motorsport use, no instructions included